 |
 |
 |
|
Connect Tech’s Cogswell Vision System is powered by NVIDIA Jetson. This system is pre-integrated with the NVIDIA Jetson TX2
supercomputer-on-module, providing 256 CUDA cores on the NVIDIA Pascal or Maxwell architecture. Cogswell Vision System comes in a
black anodized metal enclosure and is both fanless and cable free.
This system is ideal for Machine Vision applications allowing up to 5
Gigabit Ethernet cameras to be connected, 4 of which can be powered by
on board Power over Ethernet. This system also comes equipped with USB
3.0, USB 2.0, USB OTG, RS-232, miniPCIe and mSATA expansion.
Cogswell Vision System Powered by NVIDIA Jetson TX2
- Specifically designed for use with GigE Vision Cameras
- 5 x Gigabit Ethernet Channels – 4 x PoE, 2 x PoE+ PSE Gigabit Ports
- Only a single +12V input required; No external 48V PoE power required
- 1 x USB 3.0, 1x USB 2.0, 1x USB OTG, 2x RS-232, 1x miniPCIe, 1x mSATA
- Extended Temperature Range -20°C to +80°C
- Mounting option (Surface Edge Mount)
|
Compatibility
|
NVIDIA Jetson TX1, NVIDIA Jetson TX2
|
| GPU |
Jetson TX1: 64-bit ARM® A57 CPUs, Jetson TX2: HMP Dual Denver 2/2MB L2 + Quad ARM® A57/2MB L2 (Up to 2 GHz)
|
| Mechanical Enclosure Details |
Black Anodized Aluminum Enclosure, Integrated Finned Passive Heatsink, Fanless Solution
|
| Networking |
5x Gigabit Ethernet Ports
• 4 x IEEE 802.3af (POE) 15.4W PSE Gigabit Ethernet Ports
OR
• 2 x IEEE 802.3at (POE+) 25.5W PSE Gigabit Ethernet Ports
|
|
Display |
1 x HDMI 1.4a (Type-A vert RA)
|
| USB |
1 x USB 3.0 Port (Type-A); 1 x USB OTG (Micro-AB); 1 x USB 2.0 (Type-A); 1 x USB 2.0 to miniPCIe Slot
|
| Storage |
1x microSD Card Slot, 1x mSATA Full Sized Slot
|
| UART Type |
2 x RS-232
|
| I2C |
I2C Channel 1 @ 3.3V IO
|
| CAN |
1x CAN 2.0b Port
|
| GPIO |
4 bits of 3.3V (level shifted GPIO)
|
| Antenna |
2x SMA Antennas
|
| Expansion |
1 x miniPCIe Slot with PCIe & USB
|
| LEDs |
GbE LEDs, PSU PGOOD, RESET#_OUT
|
| Power Requirements |
+12 DC Input Only, No external 48V is required, carrier creates its own PoE power
|
| Dimensions |
215mm x 154mm x 72.2mm
|
| Buttons |
Power, Reset, Recovery
|
| Operating Temperature |
-20°C to +80°C (-4°F to +176°F)
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Support
Products Backed by over 30 years in business, Connect Tech has built a
solid reputation of expertise in providing engineering design services,
delivering unsurpassed technical support, and developing innovative
products for embedded applications. Featuring an
exciting family of products offering rugged small form factor solutions for
the NVIDI Jetson products.
Technical note: TX2/TX2i/TX1 modules: CTI L4T needs to be loaded for full functionality. (Further info)
|
|
|
|
|
|
|